BS 6375-2-1987 Performance of windows - Specification for operation and strength characteristics
|
ID： |
F284CB16E68E4239A6DF32EED5FF6C99 |
|
文件大小(MB)： |
0.4 |
|
页数： |
20 |
|
文件格式： |
|
|
日期： |
2008-9-6 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS 6375-2:1987,Incorporating,Amendment No. 1 and,implementing,Amendment No. 2,Not published,separately,Performance of,windows —,Part 2: Specification for operation and,strength characteristics,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,Licensed Copy: Ronald Amith, , Tue Nov 22 05:27:53 GMT 2005, Uncontrolled Copy, (c) BSI,BS 6375-2:1987,This British Standard, having,been prepared under the,direction of the Elements and,Components (of Diverse,Materials) for Buildings,Standards Committee, was,published under the authority,of the Board of BSI and comes,into effect on 30 January 1987,BSI . 12-1998,The following BSI references,relate to the work on this,standard:,Committee reference ECB/15,Draft for comment 85/10940 DC,ISBN 0 580 15613 3,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted by the Elements and,Components (of Diverse Materials) for Buildings Standards committee,(ECB/-) to Technical Committee ECB/15 upon which the following bodies were,represented:,Aluminium Window Association,Association of Builders’ Hardware Manufacturers,British Plastics Federation,British Precast Concrete Federation Ltd.,British Wood Preserving Association,British Woodworking Federation,Building Employers Confederation,Consumer Standards Advisory Committee of BSI,Department of the Environment (Property Services Agency),Department of the Environment (Building Research Establishment, Princes,Risborough Laboratory),Flat Glass Manufacturers’ Association,Glass and Glazing Federation,Guild of Architectural Ironmongers,Health and Safety Executive,Institution of Fire Engineers,London Housing Consortium,National House-Building Council,Royal Institute of British Architects,Steel Window Association,Timber Research and Development Association,Coopted member,Amendments issued since publication,Amd. No. Date of issue Comments,6248 October 1989,9115 August 1996 Indicated by a sideline in the margin,Licensed Copy: Ronald Amith, , Tue Nov 22 05:27:53 GMT 2005, Uncontrolled Copy, (c) BSI,BS 6375-2:1987,. BSI 12-1998 i,Contents,Page,Committees responsible Inside front cover,Foreword ii,Introduction1,1 Scope 1,2 Definitions 1,3 Window types 2,4 Glazing and glass 2,5 Testing 2,6 Performance requirements 2,Appendix A Test methods 6,Figure 1 — Test 3. Arrangement for resistance to excessive operating force 8,Figure 2 — Test 4. Arrangement for release of jammed sash 9,Figure 3 — Test 5. Arrangement for release of jammed hinge 10,Figure 4 — Test 6. Arrangement for strength of restricted opening,and location systems 11,Figure 5 — Test 7. Arrangement for resistance to accidental loading 13,Table 1 — Schedule of test requirements 3,Table 2 — Operation of fasteners 4,Table 3 — Operation of sash 4,Publications referred to Inside back cover,Licensed Copy: Ronald Amith, , Tue Nov 22 05:27:53 GMT 2005, Uncontrolled Copy, (c) BSI,BS 6375-2:1987,ii . BSI 12-1998,Foreword,This British Standard has been prepared under the direction of the Elements and,Components (of Diverse Materials) for Buildings Standards Committee.,It is the intention that the performance requirements for the operation and,strength of windows will in future be specified in the window product standards,by reference to this standard. Further Parts of BS 6375 will be published in due,course dealing with other attributes.,An endurance test will be introduced as soon as it is possible to establish the test,methods and the related performance criteria.,Part 1 of BS 6375, published in 1983, gives a classification of windows for,weathertightness in terms of test pressure levels for air permeability,watertightness and wind resistance and also gives guidance on selection and,specification.,Two acceptance levels for tests on top hung and side hung windows on variable,geometry hinges (test 5) have been included as they are considered necessary at,the time of Amendment No. 1 of this standard. In view of the continual,developments in the hardware and window frame section design, however, it is,hoped that in due course it will not be necessary to retain both levels and the,Technical Committee responsible for this standard will keep this situation under,constant review.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,pages 1 to 15 and a back cover.,The BSI copyright notice displayed……
……